MI/BM01AP/IV
- Availability: In Stock
- The detector base includes a tamper-resist feature that prevents removal of the detector without using a small screwdriver or similar tool.
- To activate this feature, use needle-nose pliers to break the tab on the detector base as shown in Figure 4A. Then, install the detector.
- To remove the detector from the base once the tamper-resist feature has been activated, insert a small-bladed screwdriver into the small hole on the side of the base and push the plastic lever away from the detector head (see Figure 4B).
- This allows the detector to be rotated counterclockwise for removal.
- The tamper-resist feature can be defeated by breaking and removing the plastic lever from the base. However, this prevents the feature from being used again.
